Description / توضیحات
EJA110E features include:
0.055% Accuracy (0.04% Accuracy optional)
0.1% Stability per 10 years
90 ms Response Time
Exida and TUV SIL 2 / SIL3 Certified
MWP 2,300 psi (MWP 3,600 psi option)
Local Parameter Setting (LPS)
Ordering Information
Model EJA110E Differential pressure transmitter
Output signal -J 4 to 20 mA DC with digital communication (BRAIN protocol)(1)
Measurement span (capsule) M 1 to 100 kPa (4 to 400 inH2O)
Process connections 5 without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material G 316L SST
Installation -9 Horizontal piping and left side high pressure
Amplifier housing 1 Cast aluminum alloy
Electrical connection 9 M20 female, two electrical connections and a blind plug(4)
Integral indicator D Digital indicator(5)
Mounting bracket B 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
ATEX /KU22 Combined KF22, KS21 and ATEX Intrinsically safe Ex ic(6)(7)
ATEX Intrinsically safe Ex ic]
Applicable Standard: EN 60079-0:2012, EN 60079-11:2012
Ui=30 V, Ci=27.6 nF, Li=0 µH(8)
Painting /X2 Coating change - Anti-corrosion coating(9)(10)
Calibration units(11) /D4 M calibration (kgf/cm² unit)
Material certificate(12) /M01 Cover flange(13)
Nitrogen(N2) Gas(15)
The “*” marks indicate the most typical selection for each specification.
HART 5 or HART 7 is selectable. Specify upon ordering.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Material of a blind plug is aluminum alloy or 304 SST.
Not applicable for output signal code G.
Applicable for Electrical connection code 2, 4, 7, 9, C and D.
Not applicable for output signal code Q.
Lower limit of ambient temperature is –15°C (5°F) when option code HE is specified.
Not applicable for amplifier housing code 2 and 3.
Not applicable with color change option.
The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
Material traceability certification, per EN 10204 3.1B.
Applicable for process connections codes 0 and 5.
The unit on the certificate is always Pa unit regardless of selection of option code D1, D3 or D4.
Pure nitrogen gas is used for oil-prohibited use (option codes K1, K2, K5, and K6).
