Features
- ±6% Full Scale Accuracy
- ±1% Full Scale Repeatability
- Polysulfone version:
- has excellent resistance to acids & alkaline solutions
- Can be sterilized (250°F max)
- Easy to read and to install
- Convenient panel mountability
The KOBOLD KSV Series Flowmeter is a low volume measuring and controlling device calibrated for flows
of water or air. The unit has a plastic body with metal fittings and is kept leak tight through the
use of O-ring seals. The floats are either aluminum, stainless steel, glass, or titanium. Though the
float types are determined by measuring range, the customer has a choice of plastics for the body and
metals for the fittings.The KSV is supplied with or without a needle valve, depending upon the order
number. We generally recommend that the needle valve version be used to help stabilize the float during
introduction of media (particularly gases) into the flowmeter. As is typical for needle valves, complete
shutoff cannot be achieved with our valves. Should complete shutoff be desired, we recommend the installation
of a shutoff valve upstream of the KSV.
Combination I
Body, float stop: Polycarbonate
Connections: Brass
Control valve: Brass
O-rings: Buna-N
Operating temp.: 0°F to + 130°F
Combination II
Body, float stop: Polycarbonate
Connections: 303 SS
Control valve: 303 SS
O-rings: Viton
Operating temp.: 0°F to + 130°F
Combination III
Body, float stop: Polysulfone
Connections: Brass
Control valve: Brass
O-rings: Buna-N
Operating temp.: 0 to +250°F
Combination IV
Body, float stop: Polysulfone
Connections: 303 SS
Control valve: 303 SS
O-rings: Viton
Operating temp.: 0 to +250°F
