Features
- Measuring range: 0.24-4.8 GPH to 0.8-80 GPH (water)
- Fitting: 1/8" NPT, 1/4" NPT
- Material: nickel-plated brass, 316L SS
- Maximum pressure: 230 PSIG
- Maximum temperature: 176°F
- Accuracy: ±1.5% FS
The Kobold DPM pelton wheel flow sensor and turbine flow meter uses the pelton wheel principle to measure the flows of water and low viscosity liquids. Liquid passes through a nozzle at the inlet of the flow body and is precisely directed onto a flat blade pelton turbine. The turbine wheel rotates at a speed which is proportional to flow rate. The movement of the pelton wheel is detected optically. The signal from the optical sensor is processed as an amplified pulse or 4-20 mA signal which are proportional to flow rate.
In addition to the compact design, the inlet flow is redirected via a nozzle, therefore no inlet or outlet straight piping is required, and the Kobold DPM pelton wheel flow sensor can be mounted in any orientation. These features make the Kobold DPM pelton wheel flow sensor and turbine flow meter ideal for mounting in locations where space is tight.
The Kobold DPM pelton wheel flow sensor is designed for use in application temperatures from -10°F to 176°F and for flow ranges of 0.24-4.8 GPH to 0.8-80 GPH. The Kobold DPM people wheel flow sensor can tolerate a maximum pressure of 230 PSIG.
Materials of Construction
Housing – 316L stainless steel or brass
Nozzle – 316L stainless steel
Axle/Bearing – Sapphire
Pelton Wheel – Polypropylene
Receiver – Polysulfone
O-ring – Brass housing: Buna-N; 316L SS housing: Viton®
Viton® is a registered trademark of DuPont Performance Elastomers
